Moving Beam Gantry Milling Machine
video

Moving Beam Gantry Milling Machine

The GDW-4880R is a moving-beam, moving-column gantry machining center designed for very large workpieces that need a wide machining envelope without moving the workpiece itself. Its 3500 × 8000 mm fixed worktable is rated at 8000 kg/m², while the X/Y/Z/W axes provide 8500 / 5200 / 1200 / 2000 mm of travel. The spindle uses a direct-drive + BF dual gearbox arrangement with a BT50 tool interface, 20–4000 rpm speed range and 22–28 kW power. The machine is equipped with the SIEMENS ONE CNC system.
Send Inquiry
Product Introduction
 
Product Details
 

The GDW-4880R uses a fixed worktable with a moving gantry structure. Instead of moving an 8-meter-long worktable, the gantry columns travel along the X axis while the crossbeam moves vertically through the W axis. The milling head then handles Y- and Z-axis movement. This makes the machine fundamentally different from the fixed-beam machines in the GFA series and gives it a larger working envelope for long, wide and heavy components. When comparing a moving beam gantry milling machine with a fixed-beam configuration, the key point here is that the workpiece remains stationary while the machining structure moves around it.

The spindle assembly uses a 420 × 420 mm fully enclosed square ram. The servo spindle motor, gearbox and second-stage reduction gearbox are mounted at the top of the ram. The spindle motor drives the high/low-speed gear transmission directly, with the gearbox connected to the second-stage reduction unit and then to the spindle through a high-torque coupling. The spindle and gearboxes have an independent oil-cooling system to remove heat and reduce thermal deformation of the machining head.

The X axis uses a heavy-duty guideway support arrangement, while the Y axis uses precision roller linear guideways. The Z axis uses the square ram structure, and the W axis uses hardened box ways. The X/Y/Z/W axes are driven by precision ball screws, with the W axis using two separately driven ball screws on the two sides of the columns.

 
Product Parameters
 

Item

Specification

Model

GDW-4880R

Machine Type

Moving Beam, Moving Column Gantry Machining Center

CNC System

SIEMENS ONE

Worktable Size

3500 × 8000 mm

Worktable Load

8000 kg/m²

T-Slot Width × Pitch

28 × 250 mm

Gantry Width

4800 mm

Spindle Nose to Table

0–3000 mm

X / Y / Z / W Travel

8500 / 5200 / 1200 / 2000 mm

X / Y / Z Rapid Traverse

6 / 8 / 6 m/min

W-Axis Rapid Traverse

2000 mm/min

Cutting Feed Rate

1–6000 mm/min

Spindle Drive

Direct-Drive + BF Dual Gearbox

Tool Holder

BT50

Spindle Speed

20–4000 rpm

Spindle Power

22–28 kW

Spindle Torque

1410 / 1860 N·m (Rated / Maximum)

X-Axis Ball Screw

10020

Y-Axis Ball Screw

8020

Z-Axis Ball Screw

6320

W-Axis Ball Screw

8020

X-Axis Guideway

4 × 55 Heavy-Duty Roller Guideways

Y-Axis Guideway

2 × 55 Heavy-Duty Roller Guideways

Z-Axis Ram

420 × 420 mm Fully Enclosed Square Ram

W-Axis Guideway

Hardened Box Way

X / Y / Z / W Positioning Accuracy

0.05 / 0.035 / 0.025 / 0.03 mm

X / Y / Z / W Repeatability

0.033 / 0.038 / 0.02 / 0.02 mm

Electrical Requirement

260 kVA

Working Air Pressure

6–8 kg/cm²

Approx. Floor Space

15 × 8 × 8 m

The positioning and repeatability values are specified according to GB/T 19362.2-2017.

 
Product Features
 
1. Moving Gantry for a Fixed Workpiece

The 8000 mm-long worktable remains fixed while the gantry structure travels along the X axis. This avoids repeatedly shifting very large workpieces simply to reach different machining positions.

The W axis provides 2000 mm of vertical crossbeam movement, giving the machine another way to adjust the spindle position without relying only on Z-axis ram extension.

2. Moving-Column Structure

The two gantry columns move longitudinally along the machine bed. The structure is designed around the large X-axis travel and the fixed worktable, which is useful when machining long components that are difficult to reposition.

3. Direct-Drive + BF Dual Gearbox

The spindle uses a direct-connected high/low-speed gearbox combined with a second-stage BF reduction gearbox. The specified spindle speed is 20–4000 rpm, with 1410 N·m rated torque and 1860 N·m maximum torque.

This configuration is intended for large-part milling and boring where spindle torque is important, rather than for very-high-speed machining.

4. 420 × 420 mm Fully Enclosed Ram

The Z-axis uses a 420 × 420 mm enclosed square ram. The gearbox and second-stage reduction unit are positioned above the ram, leaving the main ram structure to provide the vertical support for the machining head.

5. Four-Axis Coordinated Movement

The machine can coordinate:

X axis: longitudinal movement of the gantry columns

Y axis: horizontal movement of the milling head

Z axis: vertical movement of the ram

W axis: vertical movement of the crossbeam

The technical contract specifies these four axes for machining planes, curved surfaces and holes, together with milling, boring, drilling, rigid tapping, reaming and countersinking.

6. Dual-Screw W-Axis Drive

Two precision preloaded ball screws are installed on the left and right sides of the columns for W-axis movement. Each screw is driven through a servo motor, planetary reducer and backlash-free coupling. This arrangement helps balance the weight of the moving crossbeam and ram.

DSC01147
DSC01159
DSC01160
DSC01161
 
Product Advantages
 

The biggest practical difference of the GDW-4880R is that the workpiece does not need to travel with the X axis. For an 8000 mm worktable and components with substantial mass, keeping the table fixed can simplify workpiece positioning and reduce the need for long table travel structures.

The 8500 mm X-axis travel gives the moving gantry enough longitudinal range to cover the large working area, while the 5200 mm Y-axis travel and 2000 mm W-axis travel provide additional room for large components with different widths and heights.

The spindle configuration is also intended for heavy cutting. The BT50 interface, 22–28 kW spindle and 1860 N·m maximum torque provide a combination more suited to large mechanical components than a small high-speed machining center.

For buyers comparing a moving beam gantry milling machine with a moving-table machine, the fixed-table arrangement can be useful when the workpiece is difficult to move or when the workshop needs a large, stable loading platform. The GDW-4880R's 3500 × 8000 mm table and 8000 kg/m² rated load are the main figures to consider in this type of application.

 
Product Applications
 

The GDW-4880R is intended for large components that need milling, boring, drilling and other operations from different positions without repeatedly relocating the workpiece.

General & Construction Machinery

Suitable for large machine bases, frames, structural components and heavy mechanical parts.

Power & Energy Equipment

Applicable to large equipment housings, bases and structural components used in power-generation and energy equipment.

Automotive Manufacturing

Can be used for large tooling, structural components and production equipment parts.

Mold Manufacturing

The large X/Y working envelope is suitable for large mold bases and mold structures.

Civil Aviation

Applicable to large aircraft structural components and related machining fixtures.

Shipbuilding

The fixed 8000 mm worktable provides a stable platform for large marine components and structural parts.

Rail Transportation

Suitable for long frames, structural components and large mechanical parts used in rail equipment.

These application areas are specifically listed in the GDW-4880R technical contract.

 
Customization Options
 

The GDW-4880R can be configured around the customer's workpiece size, machining process and workshop conditions. The technical contract also states that other options can be added according to actual requirements.

01/

Foundation Configuration

Available installation arrangements include:

Standard foundation

Sunken foundation

The final foundation arrangement should be confirmed before production because it affects installation and workshop layout.

02/

Machining Heads

Different automatic milling heads can be selected according to the required machining direction and access to the workpiece. For large components, this can be useful when several faces need to be machined without changing the workpiece setup.

03/

Spindle and Gearbox

The standard configuration is:

Direct-drive spindle

BF dual gearbox

BT50 tool interface

20–4000 rpm

22–28 kW

1410 / 1860 N·m rated / maximum torque

04/

CNC System

The machine uses SIEMENS ONE. The system supports functions including linear, circular and helical interpolation, rigid tapping, tool compensation, spindle positioning, coordinate transformation, error compensation, temperature compensation and PLC monitoring.

05/

Workshop-Specific Configuration

The customer can confirm the power supply, compressed-air system, foundation type, lifting method and other installation conditions before production. The technical document requires 0.6–0.8 MPa compressed air and a suitable three-phase electrical supply.

 
After-Sales Service
 
Installation and Commissioning

Before the machine arrives, the buyer needs to complete the foundation and secondary grouting according to the manufacturer's foundation drawing. The customer is responsible for foundation work, unloading, lifting and positioning.

After delivery, the manufacturer provides on-site inspection, installation, commissioning and acceptance support. The technical document specifies that the heaviest lifting component is approximately 30 tons, so lifting equipment with a capacity of at least 30 tons should be prepared.

The compressed-air system should provide 0.6–0.8 MPa, with clean and dry air. If the air supply contains excessive moisture or oil, an additional air-treatment system should be installed.

Acceptance

Acceptance is carried out in two stages.

Pre-acceptance takes place at the manufacturer's facility and checks appearance, accuracy, sheet metal and agreed machining capability.

Final acceptance takes place at the customer's factory after installation and commissioning. The final inspection focuses mainly on machining accuracy according to the technical contract.

The technical contract includes inspection items covering X/Y/Z axis perpendicularity, table flatness and parallelism, T-slot parallelism, spindle runout and spindle-axis alignment.

Training

请替换当前内容 Architectural design & planning cepteur sint occaecat cupidatat proident, taken possession of my entire soul, like these sweet mornings of spring which I enjoy with my whole...Architectural design & planning cepteur sint occaecat cupidatat proident, taken possession od my entire soul, like these sweet mornings of spring which I enjoy with my whole Lorem ipsum dolor sit ament, consectetur adipisicing elit,sed do eiusmod tempor incididunt labore et dolore magna aliqua. it enim ad minim veniam.

Training

After installation and commissioning, operator training is provided at the customer's factory. Training covers machine operation and routine maintenance.

Warranty

The warranty period is 12 months from final acceptance. During the warranty period, manufacturing- or design-related failures under normal operating conditions are covered according to the technical agreement. If remote guidance cannot solve a covered problem, the manufacturer can arrange an engineer for on-site inspection.

After the warranty period, online technical support and technical guidance remain available, and spare parts can be supplied at preferential prices. On-site service after the warranty period is charged according to the manufacturer's service terms.

 
FAQ
 

1. What type of machine is the GDW-4880R?

It is a moving-beam, moving-column gantry machining center with X, Y, Z and W controlled movements.

2. Does the worktable move?

No. The GDW-4880R uses a fixed worktable and moving gantry structure. The gantry columns move along the X axis.

3. What is the worktable size?

The worktable measures 3500 × 8000 mm and is rated for 8000 kg/m².

4. What are the X/Y/Z/W travels?

The travels are:

  • X: 8500 mm
  • Y: 5200 mm
  • Z: 1200 mm
  • W: 2000 mm

5. What spindle drive is used?

The machine uses a direct-drive + BF dual gearbox spindle with BT50 tooling.

6. What is the maximum spindle torque?

The specified maximum torque is 1860 N·m, with rated torque of 1410 N·m.

7. Why does the machine have a W axis?

The W axis moves the crossbeam vertically. It provides 2000 mm of travel, allowing the machine to adjust the machining height without relying only on Z-axis movement.

8. What CNC system is installed?

The standard system is SIEMENS ONE. It supports four-axis coordinated movement and various interpolation, compensation, monitoring and machining functions.

9. What operations can the machine perform?

The GDW-4880R can perform milling, boring, drilling, rigid tapping, reaming and countersinking, including machining of planes, curved surfaces and holes.

10. What is the warranty period?

The warranty is 12 months from final acceptance, with online technical support available after the warranty period.

 
Actual Shipment Photo
 

Actual Shipment Photo

 
Factory Showcase
 

Factory Showcase

 

Hot Tags: moving beam gantry milling machine, China moving beam gantry milling machine manufacturers, suppliers, factory, CNC Gantry Drilling Machine, CNC Moving Beam Gantry, Gantry Type Machining Center, Large Gantry Milling Machines, Moving Beam CNC Gantry, Moving Beam Moving Table Gantry Machining Center

Send Inquiry

whatsapp

Phone

E-mail

Inquiry