New Boring Milling Machine
The series covers four configurations: JMB130AH, JMB130B, JMB130 and JMB130H, allowing the spindle arrangement, speed range and control configuration to be selected according to the machining requirement.
Product Description
The JMB130 new boring milling machine is aimed at customers working with larger and heavier components. Its main travel reaches 2000 mm on X, 2000 mm on Y and 1500 mm on Z, with an additional 800 mm W-axis travel. Combined with a 10-ton table capacity, this gives the machine a working range suited to large industrial components rather than small general-purpose parts.
The series uses a 130 mm spindle with ISO 50 taper. JMB130AH and JMB130B are specified with spindle speeds of 10–2000 rpm, while JMB130 and JMB130H reach 10–2500 rpm.
The four JMB130 versions provide different combinations. JMB130AH uses the 2000 rpm spindle configuration, while JMB130B is specified with a 221.44 mm spindle-end diameter and Φ380 mm attachment configuration. JMB130 and JMB130H are listed with the 2500 rpm spindle range, 15/19.5 kW spindle motor and 1420/1600 N·m maximum spindle torque.
Sub-model: JMB130
|
Model |
Main Configuration |
Key Point |
|
JMB130AH |
130 mm spindle |
10–2000 rpm |
|
JMB130B |
130 mm spindle |
221.44 mm spindle-end diameter, Φ380 mm configuration |
|
JMB130 |
130 mm spindle |
10–2500 rpm, 15/19.5 kW |
|
JMB130H |
130 mm spindle |
10–2500 rpm, 15/19.5 kW |
Technical Specifications
|
Parameter |
JMB130AH |
JMB130B |
JMB130 |
JMB130H |
|
Spindle Diameter |
130 mm |
130 mm |
130 mm |
130 mm |
|
Spindle Taper |
ISO 50 |
ISO 50 |
ISO 50 |
ISO 50 |
|
Spindle-End Diameter |
- |
221.44 mm |
221.44 mm |
221.44 mm |
|
Spindle Speed |
10–2000 rpm |
10–2000 rpm |
10–2500 rpm |
10–2500 rpm |
|
Spindle Motor Power |
15 kW |
15 kW |
15/19.5 kW |
15/19.5 kW |
|
Maximum Spindle Torque |
1520 N·m |
1520 N·m |
1420/1600 N·m |
1420/1600 N·m |
|
Maximum Spindle Axial Thrust |
15000 N |
15000 N |
15000 N |
15000 N |
|
Attachment Configuration |
- |
Φ380 mm |
360×400 mm |
360×400 mm |
|
Attachment Length |
- |
275 mm |
350 mm |
350 mm |
|
X-Axis Travel |
2000 mm |
2000 mm |
2000 mm |
2000 mm |
|
Y-Axis Travel |
2000 mm |
2000 mm |
2000 mm |
2000 mm |
|
Z-Axis Travel |
1500 mm |
1500 mm |
1500 mm |
1500 mm |
|
W-Axis Travel |
800 mm |
800 mm |
800 mm |
800 mm |
|
B-Axis Rotation |
360° |
360° |
360° |
360° |
|
Worktable Size |
1400×1600 mm |
1400×1600 mm |
1400×1600 mm |
1400×1600 mm |
|
Maximum Table Load |
10000 kg |
10000 kg |
10000 kg |
10000 kg |
|
Rapid Feed X/Y/Z/W |
10000 mm/min |
10000 mm/min |
10000 mm/min |
10000 mm/min |
|
Rapid Feed B |
2 rpm |
2 rpm |
2 rpm |
2 rpm |
|
Cutting Feed X/Y/Z/W |
8000 mm/min |
8000 mm/min |
8000 mm/min |
8000 mm/min |
|
Y-Axis Guideway |
Box Guideway |
Linear Guideway |
Linear Guideway |
Linear Guideway |
|
CNC System |
FANUC 0i |
FANUC 0i |
FANUC 0i / SIEMENS 828 |
FANUC 0i / SIEMENS 828 |
|
Tool Magazine |
- |
Optional |
Optional |
Optional |
|
Attached Spindle |
- |
Optional |
Optional |
Optional |
Product Features
130 mm Spindle for Large Workpieces
The 130 mm spindle gives the JMB130 a larger machining platform than the JMB110, particularly for heavy boring operations and large-diameter tooling.
Four Configurations Under One Series
The series is divided into JMB130AH, JMB130B, JMB130 and JMB130H, allowing the spindle speed, spindle-end arrangement and control configuration to be selected according to the machining requirement.
2500 rpm Option
JMB130 and JMB130H reach a maximum spindle speed of 2500 rpm, while the AH and B versions are specified at up to 2000 rpm.
10-Ton Table Capacity
The 1400 × 1600 mm worktable supports up to 10,000 kg, which is particularly relevant for heavy castings and large fabricated components.
Large Multi-Axis Working Range
The 2000 mm X/Y travel, 1500 mm Z travel and 800 mm W travel provide substantial movement for large workpieces. The 360° B axis adds positioning flexibility for multi-face machining.
Product Advantages
For overseas buyers, one of the practical advantages of the JMB130 is that the machine can be selected according to the actual workpiece rather than only by spindle diameter.
A customer machining large housings may be more concerned about the 10-ton table capacity and 2000 mm X/Y travel, while another customer may put more emphasis on spindle speed, spindle-end dimensions or an optional tool magazine.
The JMB130 and JMB130H also provide the option of FANUC 0i or SIEMENS 828, giving customers more flexibility when integrating the machine into an existing workshop.
As a new boring milling machine, the JMB130 can also be configured with optional tooling, attached spindle equipment and workholding solutions according to the component drawing rather than using one fixed accessory package.
Applications
The JMB130 Series is suitable for:
Large gearbox housings
Heavy machine bases
Construction machinery parts
Energy equipment components
Large pump bodies
Valve bodies
Heavy castings
Large bearing housings
Industrial equipment frames
Large flange components
Deep-hole boring
Large-surface milling
Multi-face machining
Product Details
1. Maximum Workpiece Weight
The worktable is rated for 10,000 kg, but the actual allowable workpiece weight also depends on how the component is positioned and clamped.
2. Workpiece Size
The 1400 × 1600 mm table and 2000 × 2000 mm X/Y travel should be considered together with the workpiece dimensions and spindle-to-table clearance.
3. Spindle Selection
Customers should select between the 2000 rpm and 2500 rpm configurations according to the required tooling, material and cutting process.
4. CNC System
JMB130/JMB130H can be configured with FANUC 0i or SIEMENS 828 according to the listed specification.
5. Tooling
Tooling should be selected according to the ISO 50 spindle interface, boring diameter, cutting depth and material being machined.
6. Workshop Requirements
Before ordering, overseas customers should confirm:
● Workshop floor capacity
● Door and transportation route
● Machine installation area
● Workshop height
● Electrical power
● Foundation requirements
● Crane capacity for unloading and installation
Customization Options
The JMB130 can be configured according to the customer's component and workshop:
JMB130AH
JMB130B
JMB130
JMB130H
FANUC 0i / SIEMENS 828
Optional tool magazine
Optional attached spindle
Boring tool package
Milling toolholders
Workholding fixture
Coolant system
Chip removal system
Special electrical specification
Workpiece-specific machining accessories
Actual Shipment Photo
Factory Showcase
Hot Tags: new boring milling machine, China new boring milling machine manufacturers, suppliers, factory
You Might Also Like
Send Inquiry